Micro Motion Meters confirm they are in calibration!!
Several months ago we received a new sanitary version 
Micro Motion H-Series sensor with a Foundation Fieldbus Micro Motion 2700 Transmitter for our Proof of Concept System (see Blog Post – Proving Smart Concepts). I installed it on one of the four segments we have in the system and didn’t get a chance to do very much with it. This week I was getting the system ready for a customer demo and had the opportunity to take a little closer look at the unit.
One of the options with this unit is a function called Smart Meter Verification. The Micro Motion web site describes this function as:
Testing the entire Coriolis meter – from the structural integrity of the flow tubes to the performance of the signal processing electronics – quickly and whenever you want without any impact on the measurement makes Micro Motion Smart Meter Verification invaluable to your operation.
And it does just that. . . . . . .
You can run it directly from a method in the meter and it tells you whether it passed or failed,
but if you run it from the AMS Snap-ON you can print a great report showing the status of all the meter’s functions.
